1 00:00:01,560 --> 00:00:01,950 So. 2 00:00:03,370 --> 00:00:10,720 And now we are going to complete our exercise, which is about design and implement and address it or 3 00:00:11,020 --> 00:00:19,990 just the visuals of the objective in this exercise is to review the network requirements design of this 4 00:00:20,410 --> 00:00:28,000 address and scheme with the as a sign that IP addresses to devices basically that are going to give 5 00:00:28,000 --> 00:00:35,440 us IP address or go into calculated that need it for the hosts that we have here. 6 00:00:35,440 --> 00:00:41,200 And then we are going to assign them to the machines that we have here, which is the computer that 7 00:00:41,650 --> 00:00:42,860 switches and their alters. 8 00:00:44,470 --> 00:00:51,190 Now we're going to go strictly to the requirements that we have, you will create a subnet from the 9 00:00:51,190 --> 00:00:57,650 network address 192, 168 72 zero subnet mask 24. 10 00:00:57,670 --> 00:01:02,820 When you see the slush, that means that the number is inserted Musk. 11 00:01:03,690 --> 00:01:12,960 The initial reforms are not as follows, we have the local area network or the last one need seven homes 12 00:01:13,470 --> 00:01:22,170 to need 15 votes, but we need 20 miles and the line also needs 58 hosts. 13 00:01:23,620 --> 00:01:29,500 So basically, they have this question for us, housing some needs are needed in this little, you can 14 00:01:30,310 --> 00:01:32,020 give me how many summits that we need. 15 00:01:34,590 --> 00:01:36,330 Or is it for. 16 00:01:38,000 --> 00:01:38,900 Actually, it's fine. 17 00:01:39,410 --> 00:01:41,570 I'm going to tell you what I'm going to tell you. 18 00:01:41,840 --> 00:01:43,010 We have the line here. 19 00:01:43,460 --> 00:01:46,610 The first line, the second line, the third line, the fourth line. 20 00:01:46,620 --> 00:01:48,470 And don't forget this one. 21 00:01:48,500 --> 00:01:51,920 It is also a network that means that we need a subnet for it. 22 00:01:54,230 --> 00:02:04,430 They are going to calculate this IP address going and use the the the traditional way, the old way, 23 00:02:04,430 --> 00:02:07,040 or we can use the application that we have here. 24 00:02:07,730 --> 00:02:14,360 So it is also an opportunity to show you how to use the seven calculate. 25 00:02:16,540 --> 00:02:20,260 Now we are going to go to the country later, right? 26 00:02:20,920 --> 00:02:26,230 Our IP address one nine two two one six eight seven two two zero subnet mask twenty four. 27 00:02:27,220 --> 00:02:34,370 And then I go to it, don't forget network. 28 00:02:34,390 --> 00:02:38,940 We are going to put the host required. 29 00:02:39,280 --> 00:02:40,180 You have seven. 30 00:02:40,420 --> 00:02:47,050 Yeah, fifteen, twenty nine and fifty eight. 31 00:02:47,680 --> 00:02:52,420 Not let's not forget to hit calculate. 32 00:02:55,000 --> 00:03:03,430 And then we have every single type of the the IP address is needed. 33 00:03:04,180 --> 00:03:05,920 Now you should know something. 34 00:03:06,580 --> 00:03:09,700 And we have it on our records, which is. 35 00:03:11,270 --> 00:03:18,200 We always, always used to first submit for the logistical and use the second submit for the second 36 00:03:18,200 --> 00:03:22,180 largest look, the third or the third largest. 37 00:03:22,670 --> 00:03:29,400 This is how we do it or how we do it in the Cisco packages or in network engineers. 38 00:03:30,340 --> 00:03:30,850 It means. 39 00:03:31,880 --> 00:03:40,850 The most required one in hosts view is that it is beautiful, we need 58, that means. 40 00:03:43,280 --> 00:03:51,140 The first time that we are going to visit to this lot or to this local area network and basically always, 41 00:03:51,140 --> 00:03:59,930 always the less the less the I mean, the less of it is always for the connection between the two characters, 42 00:04:00,350 --> 00:04:01,220 which is to. 43 00:04:02,600 --> 00:04:08,480 Now, as you can see here, we have the IP address of the network or the first subnet and the broadcast 44 00:04:08,480 --> 00:04:13,820 and the host from the beginning to the end required those also the subnet mask. 45 00:04:15,860 --> 00:04:16,220 No. 46 00:04:18,200 --> 00:04:19,430 Let's not forget. 47 00:04:21,750 --> 00:04:22,830 Let's not forget. 48 00:04:28,070 --> 00:04:30,320 The completion of the subnet table. 49 00:04:31,200 --> 00:04:38,400 That means the document of the LSM submit to complete this on the table, including a description of 50 00:04:38,610 --> 00:04:47,940 the summit as w-word the number of votes needed, the network edges of the subnet, the first usable 51 00:04:47,940 --> 00:04:53,490 address and the broadcast address and repeat for all addresses. 52 00:04:54,780 --> 00:04:58,510 And now, basically here they are just telling us how to. 53 00:05:00,600 --> 00:05:01,890 How to 54 00:05:05,640 --> 00:05:11,400 write in a traditional way, the things that we had already here in our application.