1 00:00:00,240 --> 00:00:07,680 Hi, everyone, in this lecture, we are going to learn about how to change the mood over Wi-Fi adapter. 2 00:00:08,860 --> 00:00:15,730 So this is the first step to put your wireless card into a monitor mode, swim monitor mode, your card 3 00:00:15,760 --> 00:00:19,460 can listen to every packet that is around us. 4 00:00:19,840 --> 00:00:25,040 So by default, the mode of our wireless device is set to manage mode. 5 00:00:25,630 --> 00:00:33,940 That means our wireless device will only capture packets that have our device Mac address as the destination 6 00:00:33,940 --> 00:00:34,630 packages. 7 00:00:35,230 --> 00:00:42,550 So it will only capture Parker's data actually directly to our guy Limousin. 8 00:00:44,020 --> 00:00:51,330 But we want to capture all the factors that are within our range, even if the destination market is 9 00:00:51,340 --> 00:00:52,820 not our Mac address. 10 00:00:53,350 --> 00:00:55,770 So, guys, let's see how we can do that. 11 00:00:56,470 --> 00:01:01,190 So in order to do that, we need to set our model to promote. 12 00:01:01,810 --> 00:01:06,460 So let's see how we can change the mode of our Wi-Fi adapter. 13 00:01:06,830 --> 00:01:11,840 OK, for that, you need to open the terminal window, which as you can see here. 14 00:01:12,910 --> 00:01:14,020 Now, let's zoom here. 15 00:01:14,590 --> 00:01:21,730 And the first step is that you need to connect your Wi-Fi adapter with the device in which you're using 16 00:01:22,060 --> 00:01:22,570 Linux. 17 00:01:23,110 --> 00:01:31,020 So after connecting so you can see that in devices and USB, you can see that I'm having Atheros, U.B. 18 00:01:31,030 --> 00:01:31,720 nine Wannsee. 19 00:01:31,720 --> 00:01:33,610 So this is the adapter that I'm using. 20 00:01:33,910 --> 00:01:40,060 OK, so you need to select to adapt then and after this disclosers and in order to check it disconnected 21 00:01:40,270 --> 00:01:48,970 or not, simply if config and hit enter so often enter as you can see that villans zero zero. 22 00:01:48,980 --> 00:01:53,000 That means we are, we have successfully connected with our Wi-Fi adapter. 23 00:01:53,410 --> 00:01:58,630 So now let's check how we can see actually work with it. 24 00:01:58,660 --> 00:02:05,800 OK, so first of all, let's clear this particular screen and the first go on that I'm going to give 25 00:02:05,800 --> 00:02:07,480 you is if config. 26 00:02:09,140 --> 00:02:18,400 If config name of your wife interface and simply don't know what it will do, it will disable the management, 27 00:02:18,650 --> 00:02:21,500 OK, of after hitting enter, it is not going anywhere. 28 00:02:21,530 --> 00:02:23,030 That means everything is going fine. 29 00:02:23,750 --> 00:02:24,200 Then the next. 30 00:02:24,200 --> 00:02:27,830 Come on, I'm going to give here is I w OK guys. 31 00:02:28,130 --> 00:02:35,750 So let me sue you if config v line. 32 00:02:36,960 --> 00:02:43,830 Up first of all, up, and then I'm going to sue you in which mode currently my debate is on. 33 00:02:44,360 --> 00:02:48,570 OK, simply give the blue can be entered into soft lighting. 34 00:02:48,570 --> 00:02:51,660 And as you can see, that mode is equal to manage. 35 00:02:51,840 --> 00:02:54,030 That means we need to change the more to mind. 36 00:02:54,310 --> 00:02:55,900 OK, so now let's do it. 37 00:02:56,310 --> 00:02:58,080 So this is important to you. 38 00:02:58,090 --> 00:03:00,050 That is why stop the process. 39 00:03:00,270 --> 00:03:10,290 Now, let's see again simply if Canfor interface name down so it will down and then the next come on 40 00:03:10,320 --> 00:03:18,250 I the blue config vilan zero mode is more neutral. 41 00:03:18,890 --> 00:03:24,960 OK, so this command is used to enable the motor mode now to enter into Nuada. 42 00:03:24,980 --> 00:03:26,800 That means everything is going very fine. 43 00:03:27,570 --> 00:03:28,590 So now let's go on that. 44 00:03:28,590 --> 00:03:29,760 I'm going to give you here is. 45 00:03:31,070 --> 00:03:34,160 A gun free vilan. 46 00:03:35,130 --> 00:03:38,520 Now it's time to up our interface, now to. 47 00:03:39,640 --> 00:03:42,200 So now, as you can see that it is working. 48 00:03:42,220 --> 00:03:45,130 Now everything is going fine now our device is now up. 49 00:03:45,160 --> 00:03:50,510 OK, so now let's check by giving IWK config. 50 00:03:50,560 --> 00:03:51,850 Come on, let's check. 51 00:03:53,440 --> 00:03:56,320 Enrichment, currently it is on, OK? 52 00:03:56,360 --> 00:04:02,920 So OK, so I w config, we learn zero in our data. 53 00:04:03,820 --> 00:04:06,060 So as you can see that offloading under. 54 00:04:07,040 --> 00:04:09,600 We are having more difficult to monitor. 55 00:04:10,530 --> 00:04:19,070 OK, so this means that we have successfully geneste over monitor mode management to monitor more. 56 00:04:20,070 --> 00:04:25,830 So as we all know that we have converged all can you know, we have changed the mood as more so now 57 00:04:25,830 --> 00:04:33,300 we are able to capture all the Wi-Fi packets that are within our reach, even if the packets are not 58 00:04:33,300 --> 00:04:37,560 dedicated to our computer or even without knowing the password of the target. 59 00:04:38,070 --> 00:04:43,030 OK, so for that, we need a program that can capture the packets for us. 60 00:04:43,050 --> 00:04:49,350 So this program we are going to use here is Adam Engy, so let's see how we can work with it.