1

00:00:01,390 --> 00:00:08,370

So in this way we are going to fix the resolution of our Karli VNC viewer.



2

00:00:08,470 --> 00:00:14,720

So right now you can see the resolution is not correct so we can fix this.



3

00:00:14,890 --> 00:00:21,990

So all we have to do is start our terminal or we can do it from putty as well.



4

00:00:22,030 --> 00:00:27,160

So let's just do it from party because right now you can see the clear picture.



5

00:00:27,340 --> 00:00:34,150

So all we have to do is let's just minimize that and let's just do Control-C on our party



6

00:00:37,880 --> 00:00:43,770

rate and let's just get out and let's just move and do our rubric treat.



7

00:00:44,130 --> 00:00:45,370

That's just too close.



8

00:00:49,700 --> 00:00:50,310

Right.



9

00:00:50,360 --> 00:00:58,370

So we have to create our Darick deal with the we can call it FRAP 32.



10

00:00:59,100 --> 00:01:01,920

And all we have to do is mount



11

00:01:04,590 --> 00:01:10,610

our dev and Imam Rauf vidoe the one right.



12

00:01:10,680 --> 00:01:18,750

We have to Malke this m m c block you know the one who are infected you do get equipment which we just



13

00:01:18,750 --> 00:01:21,470

create to create.



14

00:01:21,720 --> 00:01:31,240

And let's just do less and spread it to.



15

00:01:31,280 --> 00:01:36,010

So all we have to do is to set up our resolution.



16

00:01:36,010 --> 00:01:40,830

You have to fix the resolution in conflict or be active file.



17

00:01:41,090 --> 00:01:43,450

So let's just do not know.



18

00:01:44,060 --> 00:01:47,820

I don't think it should be in fact page 2.



19

00:01:48,000 --> 00:01:56,230

So contract for 30 to configure the x key and all we have to move at the bottom



20

00:02:03,100 --> 00:02:15,080

Betty not five or right at the bottom now all we have to do is copy all these come ons which I'm going



21

00:02:15,080 --> 00:02:25,750

to provide the resources and basic right so so here you just have to change your rate according to your



22

00:02:25,950 --> 00:02:27,020

monitored rate.



23

00:02:27,150 --> 00:02:30,950

I'm within 1 9 2 0 1 0 8 0.



24

00:02:31,190 --> 00:02:37,540

So I have just pasted this into my configured file.



25

00:02:37,640 --> 00:02:41,910

Then you have to do control X to right.



26

00:02:41,910 --> 00:02:45,640

You have to do it first and then you have to hit enter.



27

00:02:45,700 --> 00:02:46,230

Right.



28

00:02:47,260 --> 00:02:50,140

So the resolution is set.



29

00:02:50,140 --> 00:02:58,050

Now all we have to do is to reboot our Raspberry Pi device so we can do it from here.



30

00:03:04,580 --> 00:03:06,500

So that connection will last.



31

00:03:07,010 --> 00:03:08,330

And it's really big fuel.



32

00:03:08,330 --> 00:03:09,800

Second to the star



33

00:03:13,310 --> 00:03:24,130

for I have to just connect my bike again using the same IP for all I have to do is our dash a few of



34

00:03:24,130 --> 00:03:26,480

us connected with the same IP again.



35

00:03:29,220 --> 00:03:31,280

Phoo Lesters.



36

00:03:31,540 --> 00:03:34,420

So that's just copy this IP



37

00:03:38,210 --> 00:03:39,680

and start again.



38

00:03:43,640 --> 00:03:51,860

And again you have to log in with the tool and password to right.



39

00:03:52,340 --> 00:03:59,740

So again we have to start our VNC server.



40

00:03:59,870 --> 00:04:01,300

So this is the come on to start.



41

00:04:01,360 --> 00:04:02,300

Nancy so



42

00:04:10,230 --> 00:04:12,450

that we insincerities started now.



43

00:04:13,040 --> 00:04:17,260

Let's just connect it with the same IP



44

00:04:20,150 --> 00:04:24,580

and that could give the possible to.



45

00:04:24,810 --> 00:04:30,120

And now as you can see we are getting the correct resolution according to our moderator.



46

00:04:30,510 --> 00:04:32,870

So we have to go faster.



47

00:04:34,940 --> 00:04:36,880

But username root



48

00:04:40,640 --> 00:04:45,270

the Bosphorus to Saudi.



49

00:04:45,350 --> 00:04:52,640

So as you can see we are connected with our rasberry by golly Linux machine with correct resolution



50

00:04:52,910 --> 00:04:53,490

right.



51

00:04:53,660 --> 00:05:00,340

So in the next studio we are going to set up our wireless adapter and set up the power settings right.