1 00:00:00,520 --> 00:00:04,010 Okay, so now let's go one step further and add our collie to the network. 2 00:00:04,030 --> 00:00:05,200 Are you ready for this? 3 00:00:06,810 --> 00:00:14,160 First of all, let me change the labels from the IP block to the IP address and this one as well. 4 00:00:15,040 --> 00:00:17,200 And create the labels for VLANs. 5 00:00:19,600 --> 00:00:23,620 From the S3 Main Menu Select Preferences. 6 00:00:24,500 --> 00:00:29,660 In the tree at the left hand side, you see that there is a VMware VMs. 7 00:00:30,340 --> 00:00:33,130 It's a menu item under the VMware menu. 8 00:00:34,250 --> 00:00:35,010 You got it? 9 00:00:35,030 --> 00:00:36,080 Okay, Select it. 10 00:00:37,320 --> 00:00:41,160 Now here I have a few VM templates that I've added before. 11 00:00:41,910 --> 00:00:48,300 You are supposed to have nothing here at the moment unless you added something before as well. 12 00:00:49,010 --> 00:00:57,320 So in any event, click new and a new VMware VM template window appears and the VMware virtual machines 13 00:00:57,320 --> 00:00:59,690 are already listed in the combo box. 14 00:01:00,390 --> 00:01:03,450 So select Kali Linux 2018. 15 00:01:03,690 --> 00:01:11,340 Do not select use as a linked base VM because it's experimental at the moment and it could have some 16 00:01:11,340 --> 00:01:13,590 bugs that could just throw you off. 17 00:01:13,590 --> 00:01:17,550 So right here, let's just click finish. 18 00:01:18,400 --> 00:01:22,420 All right, Now we have a template in G three. 19 00:01:22,450 --> 00:01:26,830 You can edit it here or delete it just like the router that we added before. 20 00:01:27,590 --> 00:01:29,630 Okay, so its name is too long. 21 00:01:29,630 --> 00:01:35,900 So let's click edit, change the name and click okay and okay again. 22 00:01:36,870 --> 00:01:39,760 Now we're ready to add it to our network. 23 00:01:39,780 --> 00:01:47,070 So from the devices toolbar, if you expand the end devices, that's where you see Kelly. 24 00:01:47,700 --> 00:01:50,430 So drag and drop it into the workspace. 25 00:01:51,560 --> 00:01:54,170 And a label showing its IP address. 26 00:01:54,200 --> 00:01:58,760 I'll make it IP 10.3 and. 27 00:01:59,480 --> 00:02:01,280 It'll be in Vlan ten. 28 00:02:03,560 --> 00:02:08,690 So click the last item in the Devices toolbar to connect Colley to the switch. 29 00:02:09,430 --> 00:02:15,280 Click the switch, select the interface, and I'll select fast Ethernet 1/3. 30 00:02:16,360 --> 00:02:17,340 And click Collie. 31 00:02:18,080 --> 00:02:20,750 Select the only option Ethernet zero. 32 00:02:21,230 --> 00:02:21,900 Uh oh. 33 00:02:21,920 --> 00:02:23,050 We got a problem. 34 00:02:23,060 --> 00:02:24,440 But no worries. 35 00:02:24,440 --> 00:02:25,760 We're troubleshooters here, right? 36 00:02:25,880 --> 00:02:28,760 It's not an unexpected situation. 37 00:02:29,490 --> 00:02:31,830 An error message appears at the top right corner. 38 00:02:31,830 --> 00:02:38,310 It says we have to stop the VM and allow DNS three to change the attachment type. 39 00:02:38,610 --> 00:02:42,750 You can see the same message in the S3 console at the bottom. 40 00:02:43,880 --> 00:02:46,550 Go to Cali here and shut it down. 41 00:02:48,410 --> 00:02:51,830 And from the virtual machine menu item select shut down. 42 00:02:51,860 --> 00:02:53,960 It's going to take about two minutes. 43 00:02:54,900 --> 00:03:01,740 But while Kylie is shutting down, let's go to three and allow it to change the VMs attachment type. 44 00:03:02,010 --> 00:03:10,260 So from three, the main menu select preferences, select VMware VMs at the left hand side tree and 45 00:03:10,260 --> 00:03:12,480 click Collie, and then click edit. 46 00:03:13,340 --> 00:03:22,730 Now you can select the network tab and here there's a check box to allow Gns3 to override VMware adapter. 47 00:03:22,730 --> 00:03:27,500 So check it and click okay and then okay again. 48 00:03:29,420 --> 00:03:33,680 And we're still waiting for Kylie to be shut down. 49 00:03:35,530 --> 00:03:38,680 Okay, so let's try to connect Cali to the switch again. 50 00:03:41,870 --> 00:03:44,300 But we have another error message. 51 00:03:44,420 --> 00:03:48,860 It says Nat is already configured on the network adapter. 52 00:03:49,420 --> 00:03:53,920 So let's allow anyone to use any adapter. 53 00:03:54,630 --> 00:03:54,960 Okay. 54 00:03:54,960 --> 00:03:56,530 So I think I know the problem. 55 00:03:56,550 --> 00:03:57,330 Do you? 56 00:03:58,050 --> 00:03:59,010 We'll find out. 57 00:03:59,700 --> 00:04:06,540 So we have to remove Carly from the workspace because this one has been added before. 58 00:04:06,540 --> 00:04:10,380 We allow Gns3 to configure VMware's network interface. 59 00:04:11,050 --> 00:04:14,380 So now I'll add Carly again by drag and drop. 60 00:04:15,950 --> 00:04:17,810 Now connected the switch. 61 00:04:20,720 --> 00:04:21,290 Okay. 62 00:04:21,290 --> 00:04:25,910 But before starting Cali, let me clear the S3 console. 63 00:04:25,940 --> 00:04:27,890 Now let's start Cali again. 64 00:04:28,010 --> 00:04:28,450 What? 65 00:04:28,460 --> 00:04:30,260 Another error message? 66 00:04:30,560 --> 00:04:32,960 Okay, no worries. 67 00:04:33,020 --> 00:04:35,600 I already knew all of these messages beforehand. 68 00:04:35,630 --> 00:04:41,720 I just want to show you what happens when the S3 needs to add Cali to it. 69 00:04:42,770 --> 00:04:49,760 So this message means that we need to have a custom network interface created in VMware and available 70 00:04:49,760 --> 00:04:51,770 to be used by Gns3. 71 00:04:52,710 --> 00:05:01,020 So now from VMware Fusion, I'll start Virtual Machine library from the main menu Select Preferences. 72 00:05:01,840 --> 00:05:07,660 If you're using VMware Workstation or player, just go to the preferences there. 73 00:05:08,660 --> 00:05:10,370 Now Click network. 74 00:05:11,130 --> 00:05:17,550 As you see, I have no custom interface at the moment to be able to make changes. 75 00:05:18,030 --> 00:05:25,400 I'll click on the padlock icon, enter the password of my user, and now I can add a custom interface. 76 00:05:25,410 --> 00:05:31,290 So click the plus icon here and VM net three is added. 77 00:05:31,990 --> 00:05:37,500 And leave everything with the default values because Gns3 three will configure it for us. 78 00:05:37,510 --> 00:05:41,170 So click apply and now we can close these windows. 79 00:05:42,530 --> 00:05:47,750 So now let's go back to Cali and start from the three again. 80 00:05:48,560 --> 00:05:50,720 And sure enough, it starts. 81 00:05:56,480 --> 00:05:58,340 So log in as root user. 82 00:06:00,170 --> 00:06:03,740 And finally, we're on the Kylie desktop. 83 00:06:04,790 --> 00:06:08,260 Now let's look at the network settings of Kylie. 84 00:06:09,120 --> 00:06:11,010 This icon is a network interface. 85 00:06:11,010 --> 00:06:14,340 When you click it, you will see the interface options. 86 00:06:14,430 --> 00:06:18,720 As you see, the current interface is custom VM net three. 87 00:06:19,450 --> 00:06:25,330 Now, alternatively, we can look at the network setting from the wrench icon, which brings us to a 88 00:06:25,330 --> 00:06:30,610 General Settings panel, and then we can select network adapter from here.