1
00:00:00,390 --> 00:00:06,210
Twenty five scanning the top 20 in the top 100 ports within map, so I'll remind you.

2
00:00:07,100 --> 00:00:12,830
And our very first scan within map, all we did was enter and map, IP address.

3
00:00:14,000 --> 00:00:18,440
Now, since we didn't enter any port parameters in that particular IP scan.

4
00:00:19,550 --> 00:00:23,690
By default and map, scan the top Tsipi 1000.

5
00:00:24,350 --> 00:00:27,540
So in this way, it may be reasonable to scan for a single rope.

6
00:00:28,100 --> 00:00:31,900
However, it will not make sense to scan the entire network.

7
00:00:33,100 --> 00:00:40,210
So therefore, would it be a good idea to scan only specific ports when we want to scan, so this way

8
00:00:40,210 --> 00:00:46,270
we can scan faster and reduce the chance of, you know, catching the attention of security systems?

9
00:00:47,480 --> 00:00:53,390
And MAP offers many alternatives for scanning specific port, so let's have a look at the most used

10
00:00:53,390 --> 00:00:54,710
types of them one by one.

11
00:00:56,530 --> 00:01:02,890
So if we type the command and map, dash, dash top where it's 20 and a destination, I'd be in the

12
00:01:02,890 --> 00:01:03,400
terminal.

13
00:01:04,360 --> 00:01:08,980
And Map will search for the top 20 TCP ports on the target system.

14
00:01:10,380 --> 00:01:16,290
Now, you have to remember that Unmap always performs at DCPI ports again, if no specific parameters

15
00:01:16,290 --> 00:01:16,860
specified.

16
00:01:19,050 --> 00:01:23,220
So if you want to see what these 20 Tsipi boards are.

17
00:01:24,190 --> 00:01:30,730
We can write and map, dash, dash towards 20 v oge.

18
00:01:32,880 --> 00:01:40,170
The parameter means verbose, the oggi parameter specifies that the scan result will be in graspable

19
00:01:40,170 --> 00:01:40,500
mode.

20
00:01:41,800 --> 00:01:44,140
So we're only going to see displayed.

21
00:01:45,130 --> 00:01:50,440
The last dash parameter, similarly, if you want to see the top 100 points.

22
00:01:51,360 --> 00:01:59,670
We can write and map that desktop, it's 100 the Oji, and similarly, if you want to see the top 1000

23
00:01:59,670 --> 00:02:07,030
boards, we can write and map the Oji and we can do the same thing by adding TCP parameters.

24
00:02:07,590 --> 00:02:08,970
So what I mean by that.

25
00:02:09,990 --> 00:02:17,190
We write and map as t dash dash top port 20 v og.

26
00:02:18,430 --> 00:02:20,230
So as is the parameter.

27
00:02:21,220 --> 00:02:22,660
That's the TCP port.

28
00:02:23,840 --> 00:02:31,790
Then similarly, if you want to see the top 100 ports, right, and map estie top ports 100 the oggi.

29
00:02:33,240 --> 00:02:38,840
And then if we want to see the top 1000 ports, we can write and map as to the OGE.

30
00:02:39,330 --> 00:02:41,400
So let's do an example here.

31
00:02:42,150 --> 00:02:47,400
Open a virtual box of Anchalee Linux and open that exploitable.

32
00:02:48,710 --> 00:02:50,540
Log and Kelly Linux VMS.

33
00:02:51,600 --> 00:02:53,130
And open up terminal.

34
00:02:54,130 --> 00:02:59,500
And right, this command and Matt 10 dot zero dot 2.0 for.

35
00:03:00,470 --> 00:03:01,550
S t.

36
00:03:02,530 --> 00:03:13,540
Top sports 20, the oggi and press enter now if we only want to see the port numbers and Matt Estie

37
00:03:14,320 --> 00:03:18,610
Top Sports 20, the Oggi and press enter.

38
00:03:20,590 --> 00:03:30,040
And if you want to see what these 20 UDP boards are, we can write and map as you top wurtz 20 the oggi.

39
00:03:31,820 --> 00:03:35,870
Now, here, the rescue parameter is the UDP for.

40
00:03:36,980 --> 00:03:39,230
And the parameter is verbals.

41
00:03:40,920 --> 00:03:45,930
The Oggi parameter specifies that the scan result will be in droppable mode.

42
00:03:47,140 --> 00:03:53,680
So it specifies that what will be displayed will be displayed as a last parameter.

43
00:03:55,220 --> 00:04:02,950
So similarly, if you want to see the top 100 ports, well, right, and map as you ports 100 the oggi.

44
00:04:04,090 --> 00:04:11,400
And if you want to see the top 1000 boards will write and map, sue the oggi so we can go back and open

45
00:04:11,410 --> 00:04:14,800
virtual box open, carry Linux open disposable.

46
00:04:15,690 --> 00:04:25,620
And log in to Callisthenics VMS, beginning with terminal and write the command and map 10 zero two

47
00:04:25,620 --> 00:04:32,700
dot four as you top port 20, the Oji Recentre.

48
00:04:33,970 --> 00:04:42,520
And if we only want to see the port numbers and map Asou Top Ports 20, the Oggi and press enter.