1
00:00:00,240 --> 00:00:04,140
Scanning specific IPS or specific targets within map.

2
00:00:06,770 --> 00:00:13,460
So the goal of scanning then man should be to get the best information about the target as quickly and

3
00:00:13,460 --> 00:00:20,700
efficiently as possible, therefore it may only be necessary to scan on specific target.

4
00:00:21,350 --> 00:00:25,070
So MAP offers a very flexible number of possibilities.

5
00:00:25,670 --> 00:00:26,630
Let's have a look at some of them.

6
00:00:27,650 --> 00:00:32,990
So on our previous example, we saw how to scan a particular subnet, right?

7
00:00:34,040 --> 00:00:35,360
The Unmap Subnet Command.

8
00:00:36,710 --> 00:00:42,350
So scanning an entire network will take some time depending on the number of devices in the network.

9
00:00:44,030 --> 00:00:48,980
Scanning an entire subnet can also cause security systems to be on alert.

10
00:00:50,960 --> 00:00:57,140
Because it's attempting to access many different threads from a single source threat, a computer threat

11
00:00:57,320 --> 00:01:03,350
that is used for scanning, so this, of course, can be recognized by security systems and then the

12
00:01:03,350 --> 00:01:06,890
IP address that you're using for scanning will be blocked.

13
00:01:08,000 --> 00:01:12,680
So instead, we only scan specific threats.

14
00:01:14,270 --> 00:01:18,290
So to use this command, you need to know the target I.P. information in advance.

15
00:01:20,130 --> 00:01:23,930
So the command we will use is and map IP.

16
00:01:23,970 --> 00:01:25,920
One, IP, two, IP three.

17
00:01:26,700 --> 00:01:34,380
So here IP one, IP two and IP three are the IP information of the target system and the number of IP

18
00:01:34,380 --> 00:01:36,960
is written here can be increased.