1 00:00:00,630 --> 00:00:04,110 OK, so now let's go one step further and add our colleague to the network. 2 00:00:04,110 --> 00:00:05,010 Are you ready for this? 3 00:00:07,050 --> 00:00:14,000 First of all, let me change the labels from the IP block to the IP address and this one as well. 4 00:00:15,250 --> 00:00:17,050 And create the labels for villans. 5 00:00:19,830 --> 00:00:23,490 From the Jena three main menu, select preferences. 6 00:00:24,700 --> 00:00:31,930 In the tree, the left hand side, you see that there is a VM where VMS, it's a menu item under the 7 00:00:31,930 --> 00:00:32,920 VMware menu. 8 00:00:34,330 --> 00:00:34,870 You got it. 9 00:00:35,150 --> 00:00:35,980 OK, you selected. 10 00:00:37,510 --> 00:00:44,650 Now, here are a few VM templates that I've added before, you are supposed to have nothing here at 11 00:00:44,650 --> 00:00:48,120 the moment unless you added something before as well. 12 00:00:49,230 --> 00:00:57,390 So in any event, Kallick new and a new VMware pvm template window appears and the VMware virtual machines 13 00:00:57,390 --> 00:00:59,520 are already listed in the combo box. 14 00:01:00,620 --> 00:01:10,190 So select Calli Linux 2018 do not select use as a linked base VM because it's experimental at the moment 15 00:01:10,190 --> 00:01:13,670 and it could have some bugs that could just throw you off. 16 00:01:13,680 --> 00:01:17,420 So right here, let's just click finish. 17 00:01:18,440 --> 00:01:18,800 All right. 18 00:01:19,160 --> 00:01:25,820 Now we have a template and gennies three, you can edit it here or delete it, just like the router 19 00:01:25,820 --> 00:01:26,690 that we added before. 20 00:01:27,700 --> 00:01:35,740 OK, so its name is too long, so let's click at it, change the name and click OK and OK again. 21 00:01:37,110 --> 00:01:39,520 Now we're ready to add it to our network. 22 00:01:40,080 --> 00:01:47,100 So from the Devices toolbar, if you expand the end devices, that's where you see Kelly. 23 00:01:48,000 --> 00:01:50,250 So drag and drop it into the workspace. 24 00:01:51,730 --> 00:01:58,600 And a label showing its IP address, I'll make its IP turned up three and. 25 00:01:59,580 --> 00:02:01,140 It'll be in VLAN 10. 26 00:02:03,840 --> 00:02:08,520 So click the last item in the devices toolbar to connect Kali to the switch. 27 00:02:09,560 --> 00:02:15,140 Click the switch, select the interface, and I'll select fast Ethernet one six three. 28 00:02:16,500 --> 00:02:17,400 And click, Kylie. 29 00:02:18,250 --> 00:02:20,590 Select the only option, Ethernet zero. 30 00:02:21,260 --> 00:02:25,290 Oh, we got a problem, but no worries, we're troubleshooters. 31 00:02:25,310 --> 00:02:28,600 You're right, it's not an unexpected situation. 32 00:02:29,620 --> 00:02:31,870 An error message appears at the top right corner. 33 00:02:31,870 --> 00:02:38,140 It says we have to stop the VM and allow Jeunesse three to change the attachment type. 34 00:02:38,920 --> 00:02:42,640 You can see the same message in the Jannis three console at the bottom. 35 00:02:43,920 --> 00:02:46,440 Go to college here and shut it down. 36 00:02:48,600 --> 00:02:53,790 And from the virtual machine menu items select shut down, it's going to take about two minutes. 37 00:02:55,140 --> 00:02:56,820 But while Collie is shutting down. 38 00:02:56,850 --> 00:03:01,580 Let's go to Jeunesse three and allow it to change the VMS attachment type. 39 00:03:02,340 --> 00:03:09,930 So from Ginés three, the main menu, select preferences, select VMware VMS at the left hand side tree 40 00:03:09,930 --> 00:03:12,330 and click collee and then click edit. 41 00:03:13,530 --> 00:03:21,930 Now you can select a network tab and here there's a checkbox to allow Ginés three to override VMware 42 00:03:21,930 --> 00:03:27,330 adapter, so check it and click OK and then OK again. 43 00:03:29,350 --> 00:03:33,520 And we're still waiting for college to be shut down. 44 00:03:35,600 --> 00:03:38,500 OK, so let's try to connect Kali to the switch again. 45 00:03:42,030 --> 00:03:48,690 But we have another error message, it says Nat is already configured on the network adapter. 46 00:03:49,640 --> 00:03:53,750 So let's allow Carly one to use any adapter. 47 00:03:54,640 --> 00:03:57,190 OK, so I think I know the problem do. 48 00:03:58,120 --> 00:03:58,770 We'll find out. 49 00:03:59,990 --> 00:04:07,580 So we have to remove Colly from the workspace, because this one has been added before we allow DNS 50 00:04:07,580 --> 00:04:10,220 three to configure VMware as network interface. 51 00:04:11,330 --> 00:04:14,270 So now I'll add color again by drag and drop. 52 00:04:16,140 --> 00:04:17,640 Now connected the switch. 53 00:04:20,730 --> 00:04:27,690 OK, but before starting college, let me clear the Jeunesse three cons. Now let's start Colly again. 54 00:04:28,020 --> 00:04:32,700 But another error message, OK, no worries. 55 00:04:33,210 --> 00:04:35,730 I already knew all of these messages beforehand. 56 00:04:35,730 --> 00:04:41,700 I just want to show you what happens when the Jeunesse three needs to add Carly to it. 57 00:04:42,950 --> 00:04:49,820 So this message means that we need to have a custom network interface created in VMware and available 58 00:04:49,820 --> 00:04:51,620 to be used by DNS three. 59 00:04:52,950 --> 00:05:00,870 So now from VMware Fusion, I'll start a virtual machine library from the main menu, select preferences. 60 00:05:01,990 --> 00:05:07,480 If you're using VMware workstation or player, just go to the preferences there. 61 00:05:08,850 --> 00:05:10,230 Now Click Network. 62 00:05:11,290 --> 00:05:19,270 As you see, I have no custom interface at the moment to be able to make changes, I click on the padlock 63 00:05:19,270 --> 00:05:25,230 icon, enter the password of my user, and now I can add a custom interface. 64 00:05:25,690 --> 00:05:31,150 So click the plus icon here and VM net three is added. 65 00:05:32,150 --> 00:05:38,960 And leave everything with the default values because Janez three will configured for us, so click apply 66 00:05:39,650 --> 00:05:41,030 and now we can close these windows. 67 00:05:42,840 --> 00:05:47,580 So now let's go back to college and start from the GNC three again. 68 00:05:48,720 --> 00:05:50,550 And sure enough, it starts. 69 00:05:56,760 --> 00:05:58,200 So log in is route user. 70 00:06:00,420 --> 00:06:03,600 And finally, we're on the COLLY desktop. 71 00:06:05,070 --> 00:06:08,340 Now, let's look at the network settings of Colly. 72 00:06:09,300 --> 00:06:14,130 This icon is a network interface, when you click it, you'll see the interface options. 73 00:06:14,760 --> 00:06:18,570 As you see, the current interface is custom VM net three. 74 00:06:19,610 --> 00:06:25,830 Alternatively, we can look at the network setting from the French icon, which brings us to a general 75 00:06:25,830 --> 00:06:26,810 settings panel. 76 00:06:26,820 --> 00:06:30,480 And then we can select a network adapter from here.