1 00:00:00,530 --> 00:00:03,050 All right, so now we're ready to start our reconfigurations. 2 00:00:04,360 --> 00:00:07,900 The first step is to edit the SD configuration file. 3 00:00:10,400 --> 00:00:15,910 So it's open up this fire with a nano text editor on the turn on screen and add these options, set 4 00:00:15,980 --> 00:00:16,670 them to false. 5 00:00:27,560 --> 00:00:31,770 The second step will need to edit the Kismet configuration file. 6 00:00:33,750 --> 00:00:45,630 So here, I'll add NSC source as w l a n zero m0 n because the name of my wi fi adapter interface is 7 00:00:45,900 --> 00:00:49,920 w lan zero man when it's in monitor mode. 8 00:00:49,920 --> 00:00:50,220 Right. 9 00:00:51,210 --> 00:00:54,090 But you, of course, should be using your interface name. 10 00:00:55,800 --> 00:01:02,160 So now add a local IP address with Port 25, a one as a listening address. 11 00:01:10,050 --> 00:01:11,790 And allowed hosts. 12 00:01:17,170 --> 00:01:24,220 So finally, in GB's configuration, there are a few differences here, so these are the options for 13 00:01:24,400 --> 00:01:26,860 the new GPS configuration of kismet. 14 00:01:28,240 --> 00:01:36,850 And we're only going to uncommented this line to enable GPS, so that way Kismet will get the GPS coordinates 15 00:01:36,850 --> 00:01:38,350 through GPS. 16 00:01:44,660 --> 00:01:46,730 Now, you will also need. 17 00:01:49,220 --> 00:01:54,710 This well, if you're French, it would be the we file, but it's an o u. 18 00:01:54,710 --> 00:01:58,940 I file for Kismet to properly identify Mac, address vendors. 19 00:02:00,260 --> 00:02:03,110 So I'm just going to check and see if this link is still valid. 20 00:02:06,220 --> 00:02:08,110 OK, so this link doesn't work. 21 00:02:09,070 --> 00:02:16,960 So, again, we'll search on Google to find this file, keywords will be Wireshark, Mac address and 22 00:02:16,960 --> 00:02:17,830 vendors. 23 00:02:22,700 --> 00:02:27,260 Oh, there you go, see, Firefox has just been updated in the background, so I'll restart it. 24 00:02:31,810 --> 00:02:33,640 And I'll type the key words again. 25 00:02:36,790 --> 00:02:40,900 OK, so let's grab the very first Web site. 26 00:02:42,460 --> 00:02:45,520 All right, so here's a Wireshark manufacturer database. 27 00:02:45,870 --> 00:02:48,910 OK, it's correct, so I'll use this list. 28 00:02:51,900 --> 00:03:00,360 Now, run w you get as the command with the old parameter and we'll give a name to the output file. 29 00:03:01,300 --> 00:03:02,440 Man Yousef. 30 00:03:04,460 --> 00:03:05,540 Fire saved. 31 00:03:07,390 --> 00:03:11,230 OK, now copy it to the FTC folder. 32 00:03:15,550 --> 00:03:20,290 So now we'll configure the shared GPS application on the Android phone. 33 00:03:22,050 --> 00:03:29,190 Before starting, though, we must put Android in developer mode, so switching to developer mode may 34 00:03:29,190 --> 00:03:31,460 differ depending upon whatever device you have. 35 00:03:31,470 --> 00:03:36,210 So just find out how to switch into developer mode for your own device. 36 00:03:37,660 --> 00:03:45,760 If it just so happens that your phone is in developer mode, just open share GB's click on Connexions. 37 00:03:46,880 --> 00:03:49,880 And add a new connection using the following settings. 38 00:03:51,350 --> 00:03:58,220 Click on next and said the port to 50000, so that's five and four zeros. 39 00:03:59,420 --> 00:04:00,120 OK, OK. 40 00:04:02,000 --> 00:04:05,000 Now open the settings on the upper right corner. 41 00:04:05,930 --> 00:04:09,950 Settings must be the same as you see in a screenshot. 42 00:04:11,860 --> 00:04:13,450 All right, so go to Connexions. 43 00:04:14,330 --> 00:04:17,690 And the connection that we added now is idle. 44 00:04:19,090 --> 00:04:24,250 So to connect it to the Calli machine, just tap on it to switch to listening mode. 45 00:04:28,120 --> 00:04:30,240 Now, let's plug in the Android phone. 46 00:04:33,710 --> 00:04:37,820 So let's ensure that the wireless adapter is in monitor mode. 47 00:04:41,970 --> 00:04:45,120 And we'll also check the connectivity between the phone and Kelly. 48 00:04:46,960 --> 00:04:49,180 Just type EDB devices. 49 00:04:51,310 --> 00:04:57,910 All right, so my phone is attached, but I need to trust Callie to change the unauthorized status. 50 00:04:58,960 --> 00:05:01,660 And for that, I just click trust device. 51 00:05:02,380 --> 00:05:04,290 Now let's check the connectivity again. 52 00:05:05,940 --> 00:05:06,980 Hey, we're OK. 53 00:05:10,790 --> 00:05:14,560 So now let's run this command and check to see if the GPS is working. 54 00:05:17,470 --> 00:05:20,830 Nat cat localhost 50000. 55 00:05:22,360 --> 00:05:25,420 And sure enough, this is GPS traffic. 56 00:05:27,200 --> 00:05:36,740 All right, so hit control and see and we'll turn on GPS D and check with GPS. 57 00:05:38,440 --> 00:05:45,790 OK, so there's no GPS traffic here, so, right, something must have gone wrong, so we'll reboot 58 00:05:45,790 --> 00:05:46,960 Cally, try it again. 59 00:05:49,830 --> 00:05:54,120 All right, so here you see that I have rebooted carry on, repeat some steps. 60 00:05:57,640 --> 00:05:59,720 OK, so it's working now. 61 00:05:59,980 --> 00:06:02,260 Electrons are funny little buggers. 62 00:06:03,270 --> 00:06:08,750 But what we can do is turn on a GPS D and check it out again. 63 00:06:13,500 --> 00:06:15,840 OK, so now there's no problem. 64 00:06:16,290 --> 00:06:19,440 Traffic is coming from our Android phone. 65 00:06:22,740 --> 00:06:27,540 Now, before going war driving, we don't forget to connect to the Internet. 66 00:06:27,780 --> 00:06:29,310 All right, so let's just make sure. 67 00:06:30,490 --> 00:06:33,050 And I use the Internet on my android. 68 00:06:33,760 --> 00:06:39,820 OK, so if all the configurations are OK, the final step then is to just run the Kismet server. 69 00:06:40,660 --> 00:06:43,990 But before starting it, I'm just going to get into the car.