1

00:00:00,390 --> 00:00:06,930

In the previous two lectures, we have discussed the convention method of Korea since May and along



2

00:00:06,930 --> 00:00:14,640

with collision avoidance and in this we will see Korea since multiple axis with collision detection.



3

00:00:15,430 --> 00:00:17,130

Let's look at the difference between them.



4

00:00:17,500 --> 00:00:25,410

But what is CSM, KDDI, when the device is sending the frame is transmitting on to Wired Network.



5

00:00:25,830 --> 00:00:28,770

The CSM is the convention method is used.



6

00:00:29,820 --> 00:00:37,020

This matter is somewhat more efficient because it is possible for wire computers to detect collisions



7

00:00:37,020 --> 00:00:44,760

while wireless stations cannot detect it in a hosts or routers interface needs to send a frame.



8

00:00:44,970 --> 00:00:51,030

It checks the wire and if no traffic is detected, it sends it without checking a random.



9

00:00:51,840 --> 00:00:57,630

However, it continues to listen, and if it detects that a collision has occurred, it sends out a



10

00:00:57,630 --> 00:00:58,620

jam signal.



11

00:00:59,010 --> 00:01:04,100

It sends out a jam signal that requires all the stations to stop transmitting.



12

00:01:04,920 --> 00:01:11,070

Then the two computers that were involved in the collision will both be random amount of time.



13

00:01:11,190 --> 00:01:15,220

That is a random act of algorithm and the counters will decremental zero.



14

00:01:16,230 --> 00:01:23,280

So instead of using a random breakoff algorithm, every time a transmission occurs, Ethernet uses its



15

00:01:23,340 --> 00:01:32,190

ability to detect collisions and uses this timer only when required, which makes the process more efficient.



16

00:01:32,880 --> 00:01:40,720

I hope you have an overview of a system in the next lecture will discuss the operation of seismicity



17

00:01:40,770 --> 00:01:43,950

like we have discussed the operation of CSM MCM.