1
00:00:00,580 --> 00:00:02,160
Now is the final step.

2
00:00:02,730 --> 00:00:05,220
Run the VM and fix any problems.

3
00:00:17,630 --> 00:00:22,410
So we installed the Kelly Linnik 64 bit installer image VM in the previous lecture.

4
00:00:22,440 --> 00:00:26,910
Now let's boot it and just make sure everything's OK.

5
00:00:27,390 --> 00:00:28,730
I know it will be, don't you?

6
00:00:31,340 --> 00:00:37,220
All right, so before booting, let's do the network settings for the connection of the installed virtual

7
00:00:37,220 --> 00:00:44,990
machines, if you are using virtual box because of its architecture, you should create a net network.

8
00:00:46,920 --> 00:00:54,150
And if you are using a virtual machine and net mode without configuring any net network, a network

9
00:00:54,180 --> 00:00:56,670
is created for that virtual machine.

10
00:00:57,930 --> 00:01:00,840
But it doesn't see any of the other virtual machines.

11
00:01:00,990 --> 00:01:03,410
Even if they are in net mode.

12
00:01:06,390 --> 00:01:14,190
So go to virtual box preferences, select net networks under a network segment and add a new net network.

13
00:01:16,150 --> 00:01:19,950
And then add these two Caleigh machines to the same, that network.

14
00:01:45,550 --> 00:01:49,880
And let's start the Caleigh from ISO machine that we installed recently.

15
00:01:51,700 --> 00:01:56,920
Now, while it's booting, you can start another Caleigh machine that we previously installed with the

16
00:01:57,180 --> 00:01:58,060
A file.

17
00:02:10,880 --> 00:02:13,580
Again, with Kelly and Kelly.

18
00:02:21,170 --> 00:02:24,590
Now, this is the Kelly from I as O Machine.

19
00:02:25,690 --> 00:02:25,790
OK.

20
00:02:26,150 --> 00:02:31,040
So we'll log in with the username and password that you set during the installation.

21
00:02:32,150 --> 00:02:33,950
And welcome back.

22
00:02:35,640 --> 00:02:41,430
So let's take a quick look at the menu of the default ex FCD desktop environment.

23
00:02:42,570 --> 00:02:48,000
And it is here in the upper left hand corner, and these are the default tools of Caleigh.

24
00:02:51,400 --> 00:02:56,590
First of all, let's open up a terminal screen and switch the user to the route account.

25
00:02:57,490 --> 00:03:00,670
Then this way, we don't have to write this pseudo command every time.

26
00:03:02,730 --> 00:03:05,730
And look at the IP address assigned by the VM.

27
00:03:09,400 --> 00:03:15,490
So let's ping a remote system, for example, Google DNS eight eight eight eight eight to check the

28
00:03:15,490 --> 00:03:16,530
Internet connection.

29
00:03:18,520 --> 00:03:19,870
We received the packets.

30
00:03:20,170 --> 00:03:21,160
No packet loss.

31
00:03:21,730 --> 00:03:23,580
And we have Internet connection now.

32
00:03:24,610 --> 00:03:29,160
So just to double check I over the Web browser and visit any Web site on the Internet.

33
00:03:34,590 --> 00:03:35,520
And it's OK now.

34
00:03:37,970 --> 00:03:42,210
So now let's check the connectivity between the virtual machines and the net network.

35
00:03:43,440 --> 00:03:46,980
So first, let's look at the IP of the other Caleigh machine.

36
00:03:56,380 --> 00:03:59,050
So it's 10 dot zeroed out to dot 200.

37
00:04:00,900 --> 00:04:03,480
So let's paying the machines one to another.

38
00:04:15,190 --> 00:04:15,450
OK.

39
00:04:15,530 --> 00:04:18,800
So they are connected and that means ready to hack.